One important advantage of Hurco’s 5-axis trunnion table machining centers is its efficient design. Unlike other companies, Hurco uses an integrated trunnion table rather than just mounting a trunnion table on a 3-axis machining center and calling it a 5-axis machine. In comparison to other brands, Z offers greater clearance thanks to the incorporated trunnion table design.

VMX30Ui Maximum Performance
Please enable JavaScript in your browser to complete this form.



X, Y, Z Axis Travel



30 x 20 x 20.5 in (762 x 508 x 520 mm)

A-Axis Travel +30°/-110°
Spindle Nose to Table (Min-Max) 3.5 in / 24 in (90 mm / 610 mm)
Table Diameter 9.8 in (248 mm)
Max. Weight on Table 440 lbs (200 kg)
T-Slot Size 6 x .48 in x 60° (6 x 12 mm x 60°)
Max. Spindle Speed 12,000 rpm (12000 rpm)
Peak Spindle Motor 18 hp @600 rpm (13.4 kW @600 rpm)
Spindle Torque (peak – 1 min) 157.3 ft. lbs @ 600 rpm (213.3 Nm @ 600 rpm)


Tool Type



CAT 40 (CAT, BT, DIN 40)

Number Of Tools 40
Max Tool Diameter 3.0 in (76 mm)
Max Tool Length 11.8 in (300 mm)
Max Tool Weight 15.4 lb (7 kg)


Rapid Traverse X,Y,Z Axis



1,496, 1,496, 1,260 in/min (38. 38, 32 m/min)

Max Programmable Feedrate 1,260 in/min (32 m/min)
Rapid Traverse A, C Axis 25 rpm


Max. Operating Floor Space



155.1 x 159.8 in (3,935.5 x 4,058.9 mm)

Machine Height 113.3 in (2,877.8 mm)
Machine Weight 11,640 lbs (5,280 kg)


Power Rating/ Full Load KVA



27 KVA

Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions. Information may change without notice.
  • *Minimum measuring range specified because the usable volume isn’t cubic.**Maximum Permissible Error MPEE, according to an adapted ISO10360-2 2009 test to suit the Fulcrum, within the thermal limits defined for optimal temperature range.***The machine should not be positioned where it will be subjected to rapid changes in temperature. Max rate of ambient temperature change should not be more than 1°C/hour.