One important advantage of Hurco’s 5-axis trunnion table machining centers is its efficient design. Unlike other companies, Hurco uses an integrated trunnion table rather than just mounting a trunnion table on a 3-axis machining center and calling it a 5-axis machine. In comparison to other brands, Z offers greater clearance thanks to the incorporated trunnion table design.

VM10Ui Maximum Performance
Please enable JavaScript in your browser to complete this form.



X, Y, Z Axis Travel


21 x 16 x 19 in (533 x 406 x 483 mm)

A-Axis Travel +30°/-110°
C-Axis Travel 360°
Spindle Nose to Table Min/ Max 1.4 / 20.4 in (36 / 519 mm)
Table Diameter 7.8 in (198 mm)
Max. Weight on Table 330 lbs (150 kg)
T-Slot Size 6 x .39 in (6 x 10 mm)


Max. Spindle Speed


12000 rpm

Spindle power (peak) 15 hp (11.2 kW)
Spindle torque (peak) 45 ft-lbs @ 1,500 rpm (621 Nm @ 1,500 rpm)


Tool Type


CAT 40 / BIG PLUS® (CAT, BT, DIN 40)

Number Of Tools 24
Max Tool Diameter 3.1 in (79 mm)
Max Tool Length 9.8 in (250 mm)
Max Tool Weight 15.4 lb (7 kg)


Rapid Traverse X,Y,Z Axis


1102 in/min (28 m/min)

Max. Programmable Feedrate 1102 in/min (28 m/min)
Rapid Traverse A, C Axis 25 rpm


Max. Operating Floor Space


128.5 x 115.4 in (3,263.9 x 2,931.2 mm)

Machine Height 106.9 in (2,715.3 mm)
Machine Weight 7,392 lbs (3,360 kg)


Power rating / full load KVA


14 KVA

Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions. Information may change without notice.
  • *Minimum measuring range specified because the usable volume isn’t cubic.**Maximum Permissible Error MPEE, according to an adapted ISO10360-2 2009 test to suit the Fulcrum, within the thermal limits defined for optimal temperature range.***The machine should not be positioned where it will be subjected to rapid changes in temperature. Max rate of ambient temperature change should not be more than 1°C/hour.