With a 20,000 rpm base speed and a high-speed integrated motor spindle with ABEC-7 ceramic hybrid bearings, the VMX30UHSi combines the features of our VMX mills. An integrated 5-axis rotary table in the trunnion design is a characteristic of the VMX30UHSi. The power and speed associated with high-speed machining are provided by premium components.
| VMX30UDi | Maximum Performance |
SPECIFICATION
TRAVELS & CAPACITYX, Y, Z Axis Travel |
30 x 20 x 20.5 in (762 x 508 x 520 mm) |
| A-Axis Travel | +30°/-110° |
| C-Axis Travel | 360° |
| Spindle Nose to Table (Min-Max) | 3.5 in / 25 in (90 mm / 635 mm) |
| Table Diameter | 9.8 in (248 mm) |
| Max. Weight on Table | 440 lbs (200 kg) |
| T-Slot Size | 6 x .48 in x 60° (6 x 12 mm x 60°) |
SPINDLEMax. Spindle Speed |
15000 rpm |
| Peak Spindle Motor | 20 hp @1,500 rpm (15 kW @1500 rpm) |
| Spindle Torque (peak – 1 min) | 70.4 ft. lbs @ 1,500 rpm (95.5 Nm @ 1500 rpm) |
TOOL CHANGERTool Type |
CAT, BT, DIN 40 |
| Number Of Tools | 40 |
| Max Tool Diameter | 3.0 in (76 mm) |
| Max Tool Length | 11.8 in (300 mm) |
| Max Tool Weight | 15.4 lb (7 kg) |
FEEDRATESRapid Traverse X,Y,Z Axis |
1,771, 1,771, 1,575 in/min (45, 45, 40 m/min) |
| Max Programmable Feedrate | 1,575 in/min (40 m/min) |
| Rapid Traverse A, C Axis | 25 rpm |
SIZEMax. Operating Floor Space |
155.1 x 159.8 in (3,939.5 x 4.058.9 mm) |
| Machine Height | 113.3 in (2,877.8 mm) |
| Machine Weight | 13,068 lb (5,940 kg) |
ELECTRICALPower Rating/ Full Load KVA |
25.25 KVA |
Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions. Information may change without notice.
- *Minimum measuring range specified because the usable volume isn’t cubic.**Maximum Permissible Error MPEE, according to an adapted ISO10360-2 2009 test to suit the Fulcrum, within the thermal limits defined for optimal temperature range.***The machine should not be positioned where it will be subjected to rapid changes in temperature. Max rate of ambient temperature change should not be more than 1°C/hour.