Experience the exceptional performance of the HM1700Ri horizontal mill machine, featuring pre-tensioned ballscrews that enhance rigidity for maximum efficiency. Effortlessly operate the sizable front and side access doors, while taking advantage of the 8,000 rpm motorized spindle designed for a wide range of applications. Unleash your potential with the added benefit of a B-axis torque table with direct drive. Elevate your machining capabilities with the HM1700Ri.
HM1700Ri
SPECIFICATION
Travels & CapacityX, Y, Z Axis Travel |
67 x 47 x 35 in (1700 x 1200 x 900 mm) |
| B-Axis | Continuous |
| Table Size | 67 x 36 in (1651 x 838 mm) |
| Max. Weight on Table | 4410 lbs (2000 kg) |
| Spindle Nose to Table (min / max) | 8 / 43.4 in (203 / 1102 mm) |
| T-Slot Size | 7 x .7 in on 4.92 in centers (7 x 17 on 124 mm centers) |
SpindleMax. Spindle Speed |
8000 rpm |
| Spindle Power (peak) | 75 hp (56 kW) |
| Spindle Torque (peak) | 298 ft. lbs @ 625 rpm (403 Nm @ 625 rpm) |
Tool ChangerTool Type |
CAT 50 (CAT/BT 50) |
| Number Of Tools | 30 |
| Max Tool Diameter | 4.7 in (120 mm) |
| Max Tool Length | 11.8 in (300 mm) |
| Max Tool Weight | 44 lbs (20 kg) |
| Tool to tool ATC time | 3.7 sec |
FeedratesRapid Traverse X,Y,Z Axis |
1181, 1181, 787 in/min (30, 30, 20 m/min) |
| Max Programmable Feedrate | 787 in/min (20 m/min) |
| B-Axis Max RPM | 50 rpm |
SizeMax. Operating Floor Space |
237.6 x 179 in (6036 x 4548 mm) |
| Machine Height | 141 in (3,584 mm) |
| Machine Weight | 44517 lbs (20235 kg) |
ElectricalPower rating / full load KVA |
152 KVA |
Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions. Information may change without notice.
- *Minimum measuring range specified because the usable volume isn’t cubic.**Maximum Permissible Error MPEE, according to an adapted ISO10360-2 2009 test to suit the Fulcrum, within the thermal limits defined for optimal temperature range.***The machine should not be positioned where it will be subjected to rapid changes in temperature. Max rate of ambient temperature change should not be more than 1°C/hour.