Efficient Design
X, Y, Z Axis Travel- 67 x 51 x 35 in (1700 x 1300 x 900 mm)
B-Axis- Continuous
Table Size-67 x 36 in (1700 x 914 mm)
Max. Weight on Table- 6614 lbs (3000 kg)
Spindle Nose to Table (min / max)-8 / 43.4 in (203 / 1102 mm)
Max. Weight on Table- 330 lbs (150 kg)
T-Slot Size-7 x .7 in on 4.92 in centers

Experience the power of the HM1700i horizontal milling machine. Engineered with pre-tensioned ballscrews for unrivaled rigidity, this machine is your key to maximum efficiency. Effortlessly navigate the large front and side doors, designed for operator ease. Featuring an 8,000 rpm dual winding spindle, the comprehensive setup empowers you to tackle high and low torque operations with confidence.

HM1700i

Please enable JavaScript in your browser to complete this form.
Name

SPECIFICATION

Travels & Capacity

X, Y, Z Axis Travel

  

 

67 x 51 x 35 in (1700 x 1300 x 900 mm)
B-Axis Continuous
Table Size 67 x 36 in (1700 x 914 mm)
Max. Weight on Table 6614 lbs (3000 kg)
Spindle Nose to Table (min / max) 8 / 43.4 in (203 / 1102 mm)
T-Slot Size 7 x .7 in on 4.92 in centers (7 x 17 on 124 mm centers)

Spindle

Max. Spindle Speed

  

8000 rpm
Spindle Power (peak) 75 hp (56 kW)
Spindle Torque (peak) 298 ft. lbs @ 625 rpm (403 Nm @ 625 rpm)

Tool Changer

Tool Type

  

CAT 50
Number Of Tools 30
Max Tool Diameter 4.7 in (120 mm)
Max Tool Length 11.8 in (300 mm)
Max Tool Weight 44 lbs (20 kg)
Tool to tool ATC time 3.7 sec

Feedrates

Rapid Traverse X,Y,Z Axis

 1181, 1181, 787 in/min (30, 30, 20 m/min)
Max Programmable Feedrate 787 in/min (20 m/min)
B-Axis Max RPM 50 rpm

Size

Max. Operating Floor Space

  

237.6 x 179 in (6036 x 4548 mm)
Machine Height 141 in (3,584 mm)
Machine Weight 39690 lbs (18003 kg)

Electrical

Power rating / full load KVA

  

152 KVA
Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions. Information may change without notice.
  • *Minimum measuring range specified because the usable volume isn’t cubic.**Maximum Permissible Error MPEE, according to an adapted ISO10360-2 2009 test to suit the Fulcrum, within the thermal limits defined for optimal temperature range.***The machine should not be positioned where it will be subjected to rapid changes in temperature. Max rate of ambient temperature change should not be more than 1°C/hour.
Download Brochure